Zinc grades confirm significant system at Yerelina
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
ASX : CXO
26th November 2015
Zinc grades in mineralised breccia zones confirm significant system
at Yerelina
HIGHLIGHTS
Drill assays at Great Gladstone up to 6% zinc within a 17m intersection
of mineralised breccia grading at 1.4% zinc plus lead and 19g/t silver
33m intersection of oxidised breccias and veining drilled at Big Hill also
has elevated zinc assays
Assays show that mineralisation and alteration zones are wider than
indicated at surface
Assays confirm multiple 1km‐3km long structures within an 8km wide
zone at Yerelina are mineralised at depth
Discordant mineralised structures interpreted to represent surface
expression of a new substantial carbonate rich, sediment hosted zinc
(possibly MVT) system at Yerelina
Next step is to test the large tonnage, stratiform targets in the known
reef limestone layers within the host Tapley Hill Formation for MVTs
Zinc assays from broad mineralised breccia zones indicate that Core Exploration Ltd (ASX:CXO) has
possibly discovered a new MVT system on the Yerelina Zinc Project, which covers a total area of
1,000km2 in northern South Australia.
A 17m intersection from 145m depth of mineralised breccia and veining at the Great Gladstone
prospect averages a zinc plus lead grade of 1.4% and 19g/t silver and includes higher grade zones of
4m at 3% Zinc, 1% lead and 59g/t silver from 150‐154m (YRDH003).
The 33m intersection (approx. true width) of oxidised breccias and veining at Big Hill prospect, 5km
to the east of Great Gladstone, also contained consistently elevated zinc levels. Due to the near
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
surface oxidation of base metals sulphides, zinc levels at Big Hill were lower and averaged 0.2% zinc
over 33m from 14m‐47m depth ‐ YRDH005.
The mineralised zones intersected by both YRDH003 and YRDH005 are located down dip of
outcropping mineralised gossans. Surface channel sampling of these gossans at Great Gladstone and
Big Hill returned significant zinc, lead and silver assays. The gossans are interpreted as the
mineralised surface expression of a fault zones mapped at surface and by magnetics over 1km‐3km
(Figure 1).
Figure 1. Conceptual block model showing mineralised structures and stratiform MVT zinc targets
with magnetic image, Yerelina, SA.
Many (MVT and other) sediment hosted zinc deposits (e.g. Lennard Shelf in WA) have strong
structural control or influence on mineralising fluid movement through the sedimentary package as
observed at Yerelina. Often this is associated with mineralised breccias and veining and alteration in
fault zones and zones of shearing as observed at Yerelina.
Typically the economic scale of these deposits is driven by stratiform (often flat lying) deposits
proximal to the identified discordant mineralised structures /transport system.
The geology and system at Yerelina has potential to host large stratiform deposits in association
within the known calcareous and limestone host facies within the Tapley Hill Formation proximal to
recently drilled and also other known mineralised discordant structures (Figure 1).
Whilst further geology and exploration work is required to confidently compare the project area
with MVT analogues, CXO is encouraged by the initial correlations, giving the Company confidence
that the project area could contain a large and repeated mineralised system.
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
Great Gladstone Prospect
A 9.8m section of mineralised breccias and veining was intersected by diamond drill hole YRDH003
from a depth of 144m downhole. Zinc assays of drill core show that mineralisation extends well
beyond the observed zone of brecciation and veining (Figure 2).
Drilling intersected higher grades of 4m @ 3% zinc, 1% lead and 59g/t in an intense breccia zone
within a broader 17m‐wide lower grade halo of mineralisation, veining and alteration assaying at
1.4% combined zinc and lead and 19g/t silver (Figure 2 and Table 1).
Great Gladstone Prospect
Figure 2. Drill hole trace and interpreted geological cross section, YRDH003 Great Gladstone
Prospect, Yerelina Project South Australia.
Breccias consist of rotated slate clasts in a predominantly siderite‐carbonate‐quartz matrix with a
polyphase banded breccia/vein overprinting of sphalerite and silica along with ribbons of sphalerite
and galena mineralisation (Figures 2 and 3).
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
The mineralised zone intersected in YRDH003 is located down dip of outcropping mineralised
gossans. The gossans are interpreted as the mineralised surface expression of a fault zone thought
to be up to 1.5km long (Figures 1, 2 & 4).
Core’s previous mapping campaigns have defined high grade zinc, lead and silver mineralisation
extending over 1 kilometre at Great Gladstone. Of the 38 samples taken along a 1 km section of fault
zone at Great Gladstone, 34 returned combined lead and zinc assays in excess of 1% and over 1 g/t
silver with the best assay at 14.7% zinc. Lead values peaked at 12.7% and silver at 567 g/t (Figure 4).
Figure 3. YRDH003 150.2m ‐ Mineralised Breccia (slate, siderite‐calcite‐quartz‐sphalerite‐galena)
Core’s analysis of modern satellite imagery and the Company’s detailed heli‐borne magnetic and
radiometric survey data have identified that historic workings at Great Gladstone, Big Hill and other
prospects are hosted by a large‐scale 3km x 8km system of repeated north/south regional structures
(Figure 4).
Figure 4: 1VD RTP magnetic image highlighting relationship of structures to historic workings,
Yerelina Project, SA.
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
Big Hill Prospect
Diamond drilling has intersected a broad 30m wide zone of intermittent breccia and veining at the
Big Hill Prospect. Assays confirm this broad zone was mineralised as illustrated by the elevated zinc
results of 33m at 0.2% zinc (Figure 5).
Drilling identified the zone of brecciation and elevated zinc is 300% wider than the 10m wide gossan
observed and sampled at surface at Big Hill (Figure 5).
Big Hill Prospect
Figure 5. Drill hole trace and interpreted geological cross section, YRDH005 Big Hill Prospect, Yerelina
Project South Australia.
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
It is also expected that deeper drilling beneath the base of oxidation will hit zinc and lead sulphides
and higher grades.
The mineralised zone intersected in YRDH005 is located down dip of a 10m wide outcropping
mineralised gossans. Surface channel sampling of these gossans have also returned significant zinc,
lead and silver assays (Figure 5).
The Big Hill gossans and breccia zone are the mineralised near surface expression of the north‐south
Big Hill fault zone mapped over 3,000m long (Figure 4 & 5).
Grades of 2.7% zinc in surface rock chips has been recorded 2,000m to the north of YRDH005 along
the same Big Hill fault zone.
Zinc and lead mineralisation is interpreted to have been hosted in carbonate‐quartz‐goethite veining
and breccias as indicated by leached sulphides (goethitic boxworks and voids) at various intervals
within a 30m intersection (approx. true width) from 14m to 60m depth downhole (Figure 6).
The host rocks at Big Hill have more sandy, carbonate‐rich interbeds s indicating shallowing toward,
platform carbonate rich facies. Also the degree of oxidation, veining and structural complexity is
significantly higher than at Great Gladstone.
Numerous fault zones and veining, with alteration selvedging and discrete zones of intense
brecciation were identified, but strong weathering has leached much of the sulphide minerals
leaving goethite stained vuggy voids in breccias and fault zones and haematite (marcasite) in veins
interpreted after sulphides.
Figure 6 YRDH005 Fault and mineralised breccia at 45.7‐46.7m
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
Yerelina : Carbonate rich, sediment hosted, low T/P zinc deposits (MVT)
Core’s recent diamond core drilling and assays indicate that a substantial late stage, sediment
hosted, carbonate rich, low temperature and pressure (T/P) zinc, lead and silver mineralising system
(possibly MVT) has been active over large area at Yerelina.
Many (MVT or other) sediment hosted zinc deposits (e.g. Lennard Shelf in W.A) have strong
structural control or influence on mineralising fluid movement through the sedimentary package as
observed at Yerelina. Often this is associated with mineralised breccias and veining and alteration in
discordant fault zones and zones of shearing as observed at Yerelina.
Typically the economic scale of these deposits is driven by stratiform (often flat lying) deposits
proximal (close to) to the identified discordant mineralised structures/fluid transport system.
The Tapley Hill Formation (THF) is both the source and host of numerous base metal occurrences in
the, intracratonic basinal sediments of the 200km x 600km Adelaide Geosyncline in South Australia.
Recent research has shown that the calcareous shales of Tapley Hill Formation (THF) transition
eastward into shallow shelf and reef limestone facies of the time equivalent Balcanoona Limestone
(Oodnaminta Reef) as well as the THF containing numerous, but variable limestone interbeds and
large (+100m) allocthanous blocks of reef carbonate as mega‐breccias (Figure 7).
Limestones are ideal reactive and permeable host rocks for stratiform zinc deposits in MVT systems.
Yerelina has the host geology, structure and mineralising processes to host large stratiform zinc
deposits in association within the known calcareous and limestone host facies within the Tapley Hill
Formation proximal to recently drilled and the many other known mineralised discordant structures.
Targets for Stratiform Mineralisation
Figure 7. Limestone MVT targets within the Tapley Hill Formation. The THF facies changes into the
Balcanoona Limestone (Ood. Reef) in the Yerelina Project area. (from Hood and Wallace 2012).
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
Hole ID
Easting
Northing
Intersection
YRDH001 328171
6672700
6m @ 0.2% Pb + Zn [92‐98m]
2m @ 0.3% Pb + Zn [112‐114m]
YRDH002 330078
6673496
2m @ 0.9% Pb + Zn & 24g/t Ag [307‐309m]
YRDH003 330082
6673506
17m @ 1.4% Pb + Zn & 19g/t Ag [145‐162m]
including:
*4m@ 3% zinc, 1% lead and 59g/t Ag [150‐154m]
1m @ 3.0% Zn, 3.0% Pb & 152g/t Ag [151‐152m]
1m @ 6.0% Zn, 0.6% Pb & 34g/t Ag [153‐154m]
1m @ 1.3% Zn & 0.2% Pb [160‐161m]
YRDH004 330083
6673506
Not sampled
YRDH005 335154
6671835
*33m @ 0.2% Pb + Zn [14‐37m] including:
11m @ 0.4% Pb + Zn [14‐25m]
Table 1. Significant drill intersections
Hole_ID
Easting
Northing
RL
DIP
TAZ
Total Depth
RDH001
328171
6672700
403.4
‐60
111.5
150.6
10/09/2015
RDH002
330078
6673496
395.6
‐60
126
348.3
24/09/2015
RDH003
330082
6673506
397
‐50
90
210.3
19/09/2015
RDH004
330083
6673506
397
‐50
36.5
249.6
28/09/2015
RDH005
335154
6671835
479
‐50
84.5
78.1
01/10/2015
Total Metres Drilled
1036.9m
Table 2. Drill collar table.
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
Completion
EL 5015
20km
Figure 8. Yerelina Project (EL 5015), CXO’s surrounding 2,500km2 of tenure and regional geology
showing extent of target Tapley Hill Formation (and equivalents) in orange.
For further information please contact:
Stephen Biggins
Managing Director
Core Exploration Ltd
info@coreexploration.com.au
John Field
Field Public Relations
08 8234 9555
john@fieldpr.com.au
The information in this report that relates to Exploration Results and Mineral Resources is based on information compiled
by Stephen Biggins (BSc(Hons)Geol, MBA) as Managing Director of Core Exploration Ltd who is a member of the
Australasian Institute of Mining and Metallurgy and is bound by and follows the Institute’s codes and recommended
practices. He has sufficient experience which is relevant to the styles of mineralisation and types of deposits under
consideration and to the activities being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the
“Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Mr. Biggins consents to the
inclusion in the report of the matters based on his information in the form and context in which it appears.
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
This report also includes exploration information that was prepared and first disclosed by Core under the JORC Code 2004. It
has not been updated since to comply with the JORC Code 2012 on the basis that the information has not materially
changed since it was last reported. The information in all previous announcements has been compiled by Mr Stephen
Biggins as the Competent Person and who provided his consent for all previous announcements. The information that was
reported in announcements previously released under JORC Code 2004 is the announcement dated 19/03/2013 titled “High
Grade Lead‐Zinc‐Silver Assays from S.A. Project”
A 26 Gray Ct, Adelaide SA 5000 | T (08) 7324 2987 | E info@coreexploration.com.au
www.coreexploration.com.au
Yerelina Diamond Core – November 2015– JORC 2012
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate
to the minerals under investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
Only veined and brecciated sections of core were sampled
Samples composited on 1m intervals from ½ cut NQ2 diamond core
except for duplicate samples where each duplicate pair is made up of
composited ¼ NQ2 core.
Samples were halved 10mm around from the orientation line when
present
Where core was too fractured to be cut 50% of the representative
material was composited along the 1 meter interval
Duplicate samples were taken on every twentieth sample number in
sequence. A certified standard was inserted in sequence on every
25th sample number
Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or systems
used.
Aspects of the determination of mineralisation that are Material to the
Public Report.
Drilling
techniques
Drill sample
recovery
In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘RC drilling was used to obtain 1 m samples from
which 3 kg was pulverised to produce a 30 g charge for fire assay’).
In other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules) may
warrant disclosure of detailed information.
Drill type (eg core, RC, open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (eg core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or other type, whether
core is oriented and if so, by what method, etc).
Method of recording and assessing core and chip sample recoveries
and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery and grade
11
NQ2 Diamond Core
Full geotechnical logging including recovery was undertaken with
recoveries consistently >95%
No sample bias is expected to be present
Criteria
JORC Code explanation
Commentary
Logging
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
Sub‐sampling
techniques
and sample
preparation
The total length and percentage of the relevant intersections logged.
If core, whether cut or sawn and whether quarter, half or all core
taken.
If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the in
situ material collected, including for instance results for field
duplicate/second-half sampling.
All core was qualitatively logged in detail including lithology, colour,
weathering, texture, grainsize, alteration and mineralisation.
Quantitative geotechnical logging included measuring recovery,
number of breaks, length of pieces >10cm, longest piece, RQD,
magnetic suseptibility.
The majority of the core was orientated and structurally logged
See Sampling section above for a description of sampling and subsampling techniques.
Sample sizes are considered appropriate for the expected grainsize
of mineralisation.
Every twentieth sample collected for analysis was duplicated. A
certified standard was analysed in sequence every 25 analyses.
Subsampling techniques are undertaken in line with standard
operating practices in order to ensure no bias associated with subsampling.
The nature, quality and appropriateness of the sampling technique is
Whether sample sizes are appropriate to the grain size of the material
being sampled.
Quality of
assay data
and
laboratory
The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is considered
partial or total.
For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
12
considered adequate for the type of mineralisation and confidence
level being attributed to this initial diamond drilling program.
A certified and accredited global laboratory (Intertek-Genalysis) was
used for all assays.
Sample preparation and analysis undertaken at Intertek’s Adelaide
laboratory.
Samples were analysed using Intertek’s 4A/OM10 technique which
Criteria
tests
JORC Code explanation
Commentary
make and model, reading times, calibrations factors applied and their
derivation, etc.
involves near-total 4 acid digest and analysis using ICP-OES and
ICP-MS for 46 elements.
Internal certified laboratory QAQC is undertaken by Intertek.
Verification
of sampling
and assaying
Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (ie lack of bias) and precision have been established.
The verification of significant intersections by either independent or
alternative company personnel.
the use of twinned holes.
Data spacing
and
distribution
Primary data was captured directly into an in-house referential and
integrated database system designed and managed by the
Exploration Manager. All analysis data is cross-validated within the
database by various integrity scripts.
Analysis data is not adjusted.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Location of
data points
Duplicates and certified standards (OREAS 134B & 99B) were
inserted in sequence as detailed above.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish
the degree of geological and grade continuity appropriate for the
Mineral Resource and Ore Reserve estimation procedure(s) and
13
All coordinates are recorded in GDA 94 MGA Zone 54.
Collar locations were surveyed were undertaken by Core Exploration
staff using a hand-held GPS. This tool has an accuracy of
approximately 3m.
Downhole survey were collected nominally every 30m depth by
United Drilling Services using an electronic down hole survey system.
Elevation data was read off the DTM survey collected by Daishsat for
Core Exploration in 2012 during the heli-borne magnetic / radiometric
survey (50m flight lines)
Initial reconnaissance drilling only. No inference regarding continuity
can be made.
Samples were composited using Mapinfo’s compositing algorithm
applying a 0.1% Pb+Zn cut-off. Minimum intersection length was 1
metre and no internal dilution was included except those listed with
Criteria
JORC Code explanation
Commentary
an asterix which did include up to 2 metres of internal dilution.
classifications applied.
Orientation
of data in
relation to
geological
structure
Sample
security
Audits or
reviews
Whether sample compositing has been applied.
Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering
the deposit type.
If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
The measures taken to ensure sample security.
The results of any audits or reviews of sampling techniques and data.
14
It is evident from structural logging some of the intersections may be
sub-parallel to the vein orientations as illustrated on the YRDH003
section.
The orientation of drilling at Great Gladstone was not optimal for the
east dipping vein sets.
Drill core trays were steel strapped onto pallets for transport to Euro
Exploration Services’ Hendon warehouse for cutting by the
exploration manager. Birdsville Transport undertook the freight
transportation and the exploration manager cut the steel strapping
once delivered in Hendon.
Euro Exploration Services undertook sampling and also delivered the
cut samples to the laboratory.
Pulp samples are retained by the company for future reference and
are stored in CXO’s Adelaide office
No audits or reviews have been undertaken
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral
tenement
and land
tenure status
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
Yerelina is contained within EL 5015 that is 100% held by Sturt
Exploration Pty Ltd a wholly owned subsidiary of Core Exploration
Ltd.
Core Exploration manages EL 5015.
EL 5015 is located on Mt Freeling Station.
All drilling was undertaken outside of Heritage, Conservation or
National Parks on EL 5015.
Exploration
done by
other parties
Acknowledgment and appraisal of exploration by other parties.
Modern exploration is very limited in the Yerelina area however
extensive historical workings dating back to 1908 are evident as a
number of shafts and drives
Geology
Deposit type, geological setting and style of mineralisation.
The mineralisation style targeted is silver and base-metal veining
within an antiformal structure of Tapley Hill Formation which is
considered to be MVT-style.
Drill hole
Information
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information
for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
See table included in this announcement
Data
If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should clearly
explain why this is the case.
In reporting Exploration Results, weighting averaging techniques,
15
Intersections are calculated using combined Pb + Zn grades with a
Criteria
aggregation
methods
JORC Code explanation
Relationship
between
mineralisatio
n widths and
intercept
lengths
Diagrams
Balanced
reporting
Other
substantive
exploration
data
Further work
Commentary
maximum and/or minimum grade truncations (eg cutting of high
grades) and cut-off grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used
for such aggregation should be stated and some typical examples of
such aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values
should be clearly stated.
These relationships are particularly important in the reporting of
Exploration Results.
If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (eg ‘down hole length, true
width not known’).
Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting of
Exploration Results.
Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical
survey results; geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk density,
groundwater, geotechnical and rock characteristics; potential
deleterious or contaminating substances.
The nature and scale of planned further work (eg tests for lateral
extensions or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling areas,
provided this information is not commercially sensitive.
16
minimum cut-off of 0.1% Pb+Zn. No internal dilution is included
except for those intersections tabled with an asterix.
Intersections are down hole length only and true widths are not
reported.
Structural logging suggests some of the drilling may be sub-parallel
to vein orientations as illustrated on the attached section for
YRDH003
See attached plans and sections.
Only zones with strong veining and brecciation were sampled. It is
considered zones not sampled are unlikely to carry additional grade.
Exploration activity is very limited at Yerelina however CXO collected
heli-magnetic and radiometric data in 2012, undertook previous rockchip sampling of anomalous gossans / historical mullock piles and
submitted a limited number of samples for petrology.
Subject to Board approval additional drilling may be undertaken
Share your feedback
Discover